亚洲 小说 欧美 另类图片
普通會員
  • 浙江興益風機電器有限公司

    林建偉先生 點擊這里給我發消息

  • 認證信息: 2222

    公司所在地:浙江省 臺州市 溫嶺市

    供應信息數量:0

  • 公司性質:企業單位

聯系方式

  • 限商務會員以上等級會員查看
收藏此信息

軸流通風機

軸流通風機
訂貨量(臺) 價格(不含運費)
≥1 286.00元/臺
  • 發 貨 地浙江省臺州市,溫嶺市
  • 起 訂 量1
  • 供貨總量100臺
  • 有效期至2025-07-29
  • 信息標簽 興益 2.8 11.2
  • 分    類 軸流風機
我要訂購:
+ -
分享到:
商品詳情
品牌 興益 型號 T35/BT35/FT35
規格 2.8#~11.2# 氣流方向 葉輪端
材質 Q235 風機壓力 48pa~380pa
類型 普通通風、防腐、防爆 葉片數 4
重量 11kg~200kg 轉速 960r/min~2900r/min
配套電機功率 0.09KW~11KW    

 

T35、BT35、FT35系列Series

軸流通風機說明書

Axial flow fan

   

 

 

 

 

 

 

浙江興益風機電器有限公司
ZHE JIANG XINGYI VENTILATOR ELECTRICAL APPLIANCE CO.LTD

 

2012-3

目 錄Catalog

一、用途use……………………………………………………………3

二、規格及技術參數 Specifications and Technical Parameters………   3

三、結 構Structure……………………………………………………  3

四、安裝、使用與維護Installation, Use & Maintenance……………  4

(1)安裝前Before installation…………………………………………  4

(2)安裝時Installation  …………………………………………………  4

(3)風機的操作Fan operation…………………………………………    4

(4)風機的維護Fan maintaining  ………………………………………  5

五、常見故障分析Common problems Analysis……………………   5-6

六、風機安裝圖紙Fan installation drawings……………………………6

 

 

 

 

 

 

 

 

 

、用途use

   T35-11型軸流通風機可作為一般工廠、倉庫、辦公室、住宅內通風換氣之用。若將機殼去掉,則可作自由風扇用。以提高管道中地風壓。該系列風機具有結構簡單、低噪音、安裝簡便、運轉平穩、機械振動小等特點。適用于一般工礦企業、倉庫、辦公樓、住所等場所通風換氣使用。更可以應用于較長管道內間隔串聯安裝,用以提高管道內的壓力。所輸送氣體不允許含有粘性物質、所含粉塵及硬質顆!150mg/m3。

BT35-11型軸流通風機是T35系列的派生產品,該系列風機采用在筒體部葉輪旋轉位置鉚接優質鋁板,并采用YBF型防爆電機,適用于含有易燃易爆性氣體的場所,作一般防爆通風換氣之用。

FT35-11型軸流通風機是T35系列的派生產品,葉輪、外殼均采用玻璃鋼復合材質制作而成。廣泛應用于酸洗工段、化驗室、地下室、發電廠、電鍍、氧化廠等含有腐蝕性氣體的場所使用。也適用于一般工礦企業、倉庫、辦公樓、住所等場所通風換氣使用。

T35-11 type axial flow fan can be used as a general factory, warehouse, office, residential ventilation for.If the shell is removed, then can make the free wind fan.In order to increase in pressure pipeline.Fans of the series has the advantages of simple structure, low noise, convenient installation, stable operation, small mechanical vibration characteristics.Applies to general industrial and mining enterprises, warehouse, office, home and other places of ventilation using.It can be applied to the longer pipeline interval are arranged in series, to increase the pressure in the pipe.The delivered gas does not allow containing viscous materials, including dust and particles of less than 150mg / m3.

BT35-11 type axial flow fan is T35 series of derivative products, fans of the series used in the cylinder body of impeller rotation position riveting quality aluminum plate, and the use of YBF explosion-proof motor, suitable for containing flammable and explosive gases places, as general explosion-proof ventilation for.

FT35-11 type axial flow fan is T35 series of derivative products, impeller, the casing are made of glass fiber reinforced plastic composite materials produced.Widely used in pickling section, laboratory, basement, power plants, electroplating, oxidation plant containing corrosive gas places.Also applies to general industrial and mining enterprises, warehouse, office, home and other places of ventilation using.

二、規格及技術參數Specifications and Technical Parameters

設備編號

Equ.No.

機號

No.

傳動方式

Transmission

流量Flow

(m3/h)

全壓Whole pressure

(Pa)

電機功率Motor power

(kW)

數量Quantity

(Pcs)

 

2.8

A

1464

48

0.09KW-4P

1

 

三、結 構Structure

     T35系列軸流通風機由機殼、葉輪、集風器,電機與支架組等部分組成。

1)   機殼:由圓形風筒及支架組成,采用鋼板焊接,安裝方便。

2)   葉輪:由4片扭曲型葉片及輪轂組成。采用Q235鋼板制成,葉片按照客戶選用安裝角度焊接于輪轂上。

3)   集風器:由集風器法蘭、集風器組成。集風器為圓弧流線形,可減少氣流入口損失。

T35 series axial fan is composed of a casing, an impeller, the wind collecting device, motor and support groups and other components.

1): composed of a circular cylinder shell and a support bracket, with steel plate welding, convenient installation.

2): by 4 twisted impeller blades and a wheel hub.Using Q235 steel, blade installation angle according to the customers choice of welding on hub.

3) the wind collector: by the wind collector flange, the wind collector.The wind collecting device for circular arc streamline, can reduce the air entrance loss.

四、安裝、使用與維護Installation, Use & Maintenance

(1)安裝前Before installation

應對風機各部件進行全面檢查,機件是否完整、葉輪與標示的旋轉方向是否一致,各部件聯結是否緊密;主要機件有無損傷、傳動部分是否靈活等等。

With the wind turbine components to conduct a comprehensive inspection, work is complete, the direction of rotation of the impeller and the label is consistent, each component connection close together; the main parts have no injury, transmission part is flexible and so on.

(2)安裝時Installation

注意檢查機殼內不應有掉入、遺留的雜物及工具。在一些結合面上為了防止生銹,減小拆卸困難,應涂一些潤滑脂或機油。風機與基礎結合面、進出風管的連接處應調整使其自然吻合,不得強行聯結。更不許將管道重量加在風機各部件上,并注意保證風機的水平位置。

Pay attention to check the cabinet should not fall, remaining debris and tools.In some combination surface in order to prevent rust, reducing the disassembly difficulty, should put some grease or oil.Fan and the foundation with surface, out of the air duct connection should be adjusted so that its natural anastomosis, can not be forcibly coupling.More will be allowed to pipeline weight is put on the wind turbine components, and ensure the fan in the horizontal position.

(3)風機的操作Fan operation

風機全部安裝完畢,在總檢合格后,才能進行試運轉。試車時人數不少于兩人,一人控制電源,一人觀察風機運轉情況,發現異,F象立即停機檢查;首先檢查旋轉方向是否正確;風機開始運轉后,應立即檢查運轉電流是否平穩、電流是否超過額定電流;若有不正,F象,應立即停機檢查。檢查風機各部分的間隙尺寸,轉動部分與固定部分有無碰撞及磨擦。確定無異,F象后才能再次開機運轉。

Fan installed all qualified, in general, to make a test run.The test of more than two people, a control power supply, a human observer fan operation, abnormal phenomena immediately stop check; first checks the rotation direction is correct; fan started running, should immediately check the operating current is stable, current is over the rated current; if there is not a normal phenomenon, should stop immediately. Check.Check the fan part of the gap size, rotating part and a stationary part has no collision and friction.Determination of no abnormal phenomenon when another operation boot.

 (4)風機的維護Fan maintaining

為了避免由于維護不當而引起人為故障及自然事故的發生,充分發揮設備的效能,延長設備的使用壽命,必須加強風機的維護。

1)只有在風機設備完全正常的情況下方可運轉,定期清除風機內部的積灰、污垢等雜質,并防止生銹,為確保安全,風機的維護必須在停車時進行。

2)在風機開車、停車或運轉過程中,如發現不正,F象應立即進行檢查。

In order to avoid human error caused by improper maintenance and natural occurrence , give full play to the performance of equipment ,Extend the useful life of equipment , maintenance of the fan must be strengthened .

1)        Only the fan device is fully operational only under normal conditions , periodically clear the fan inside the fouling , dirt and other impurities , and to prevent rust , to ensure the safety , maintenance must stop the fan when .

2)        In the fan driving , parking or operation of the process , found irregularities should be immediately checked.

五、常見故障分析Common problems Analysis

(1)  風機產生振動的原因很多,可從下述幾個方面檢查:

1)葉輪旋轉時碰撞機殼,此時會發出異常聲音,原因可能是機殼或葉輪變形。

2)葉輪動平衡被破壞,原因可能是葉輪變形、葉片積灰、葉輪與主軸的聯結松動、軸承箱螺栓松動及軸承損壞。

3)風機基礎剛度不夠。

4)風機進出口安裝不良。

(1)    Fan vibration for many reasons , can be checked from the following aspects :

1)Impeller rotation collision case , abnormal sound will be issued at this time may be due to deformation of casing or impeller .

2)Balancing the impeller is damaged , probably due to deformation of the impeller , blade fouling , loose coupling impeller and spindle , bearings and bearing box bolt loose damage .

3)Not enough fan base stiffness.

4)Import and export of poorly installed fan .

(2)  電機電流過大或溫度升高,原因可能有以下幾點:

1)電機軸承損壞。

2)電壓低或電源單相斷電。

3)系統阻力過大。

4)輸送氣體密度過大。

5)輸送氣體溫度過高。

(2) the motor current is too large or the temperature is increased, the reason may have the following several points:

1) motor bearing damage.

2) low voltage or power single-phase power.

3) system to high resistance.

4) conveying gas density is too large.

5) conveying gas temperature too high.

 

 

六、風機安裝圖紙Fan installation drawings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

在線交易流程

網上支付方式

>> 您可采用的支付方式包括但不限于轉帳、匯款、現金支票等傳統支付方式,及網銀支付等多種線上支付方式。

>> 在交易中遇到糾紛,可尋求 專家服務

此處顯示 class "de-guarantee-procedure" 的內容

免責聲明:(1)以上所展示的信息由企業自行提供,內容的真實性 、準確性和合法性由發布企業負責,中國水泥備件網對此不承擔任何保證責任。我們原則上建議您優先選擇商務會員以及交易會員合作! (2)同時我們鄭重提醒各位買/賣家,交易前請詳細核實對方身份,切勿隨意打款或發貨,謹防上當受騙。如發現虛假信息,請按照中國水泥備件網首頁提供的號碼進行舉報。

全部評價
該商品未收到任何評價信息
留言
該商品未收到任何留言信息

匿名留言

亚洲 小说 欧美 另类图片